7 Tricks For Trim And Crown And Molding Painting in Arlington, VA

When you are painting the interior of your home, one thing that possibly is going to come up is the painting of trim and crown molding — it’s an issue because painting trim and crown molding aren’t quite the same as painting the rest of your interior surfaces.

Though there are some things that are similar (such as the fact that you’ll be using interior paint, of course) there are going to be a few key differences — and if you want well-painted trim and crown molding, it’s worth following some sensible advice.

Let’s now look at and consider seven tricks for trim and crown molding painting in Arlington, VA

1. Use The Right Finish

The first thing that you’re going to want to bear in mind when thinking about painting your trim and crown molding is that it’s going to be quite important to make use of the right sort of finish.

Though you might believe that you can use just about any kind of finish for this kind of paintwork, this is not the case.

A good semi-gloss is going to look a lot better than a flat finish would, for example, and it’s also going to be a lot easier to clean.

2. Different Shade From The Ceiling

Another important thing that you’re going to need to do when you’re looking to paint your trim and crown molding is to ensure that the color of the molding is not the same as the color of the ceiling.

This is true because when you have the same color on the ceiling as you do on the molding, it has a really unpleasant look to it and it makes it look like the ceiling has the molding growing forth from it as it were — not what you want to see.

3. Make Good Use Of Wood Filler

As you are working on preparing your molding for the painting process, it’s entirely possible that you’re going to find areas where you have tiny holes or flaws that make the surface look like there are missing bits.

The best thing you can do is to make use of wood filler to fill in the areas of the molding where these are going to be the case as it works well for fixing these kinds of issues.

4. Prime Before Painting

It’s important to apply primer before the first coat of paint on your molding for a couple of reasons, one being that it helps to get the paint to adhere better to the surface.

The second reason is that it will make for a more smooth surface, and anything you can do to ensure such a smooth surface is a good thing.

5. Wait After Each Coat

In painting your molding, you’re going to need to wait a bit of time after each coat before moving on to the next coat — as dull as this might seem, it is a necessary step.

This is because if you do not wait and just go on to paint the next coat, you will find that paint from the previous coat will come off onto your brush and roller, and this is really bad for the look of the paint job.

6. Apply At Least Two Coats

In almost every single case, the best thing to do is to apply more than one coat of paint to your molding — perhaps at least two coats if you really want your paintwork to look good.

In terms of durability and general good looks, you can’t beat applying at least two coats.

7. Sand Before You Paint

Lastly, you should really try to gently sand the surface of the molding before you paint.

You will be doing this to ensure a smooth surface.

Image Painting is a professional full-service residential & commercial painting contractor based in Falls Church, Virginia. We have served the Washington DC metropolitan area since 2003. You can click below to request an estimate.
Related:7 Mistakes You Need To Avoid Making Interior Painting in Arlington, VA
7 Tips To Avoid A Mess While Interior Painting in Arlington, VA
7 Tips And Tricks For Cleaning Interior Walls in McLean, VA